UNPACKING YOUR FAN
UNPACK YOUR FAN AND CHECK THE CONTENTS.
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing. Remove all
parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
1
2
9
NOTE: Design of parts shown above may look slightly different for
your specific model of fan.
04
| hinkley.com
7
3
4
8
5
6
CABANA PACKAGE CONTENT
1
Blade Set of 5
2
Hanging Bracket
3
Canopy with Trim Ring
4
Ball Moisture Cover
5
Downrod Asm.
Yoke Cover
6
Fan Housing with Motor
*Remove rubber shipping
7
supports around motor, if
applicable. Save the screws.
8
Blade Arm Set of 5
Hardware Bag
9
Pull Chain with Fob,
Bracket Mounting Hardware
(wood screws, screws, lock
washers,star washers, flat washers,
wire nuts),
Blade to Blade Arm Screws and
Fiber Washers,
"S" Hook (support fan for wiring),
Screws w/lock Washers -
Flush Mount (3),
Rubber Gasket - Flush Mount,
Balance Kit,
Safety cable hardware
(wood screw, flat washer)
XX=FAN FINISH
BL901836Fxx
CA901552Fxx
In Hardware Bag
DR94014Fxx
YC901952Fxx
X
BLI901836Fxx
MHL901836Fxx