fluidra 74143 Manuel D'instructions page 20

4. Accessories
4.1 Accessories list
Anti-vibration base, 4 pcs
Winter cover, 1pc
4.2 Accessories Installation
Draining jet, 2 pcs
Water drainage pipes, 2 pcs
16
Waterproof box, 1 pc
10M signal wire, 1 pc
Anti-vibration bases
1. Take out 4 Anti-vibration bases
2. Put them one by one on the
bottom of machine like the picture.
Draining jet
1. Install the draining jet under the
bottom panel
2. Connect with a water pipe to
drain out the water.
Note: Lift the heat pump to install
the jet. Never overturn the heat
pump, it could damage the
compressor.