Axis Communications T92E Serie Guide D'utilisation page 7

AXIS T92E05/T92E20 User's Guide
Install the hardware
Prepare the network cable
The provided network cable can be connected in several ways. The first option is to use the cable as
is, with the pre-mounted rubber gasket.
The second option is to use the provided plastic M20 cable gland, which must be used to achieve an
IP66 rating. Using any other cable gland may cause water to seep in and damage the camera.
If a cable other than the provided cable is used, you need to prepare a shielded network cable with
a gasket. Gently force the cable through the gasket provided and attach a network connector. It
may be necessary to pierce a hole in the gasket with the supplied screwdriver.
Notes:
• Do not force the network connector into the gasket.
• Do not pierce the gasket with a knife or other sharp object.
• Use a shielded network cable.
Page 7