Nipponia VOLTY Manuel Du Propriétaire page 27

OPERATION AND DRIVING INSTRUCTIONS
Pre-operation inspection
Always perform the pre-operation inspection, before driving your scooter.
It is important that pre-operation checks are carried out each time the vehicle is used. The procedure is simple and enhances the
safety of the driver. Failure to do so, may result in vehicle damage or an accident.
If any item in the Pre-operation check list is not functioning properly, have it inspected and repaired before operating the vehicle. If
you cannot correct or repair yourself, take the vehicle to your local dealer immediately.
PRE-OPERATION CHECK LIST
CHECKPOINT
Throttle grip
Wheels and tyres
Brake levers
Side stand
Instruments, lights, signals and switches
Note: if you need assistance on how to perform any of the above -mentioned tasks, do not hesitate to contact an authorized Nipponia service
center.
INSPECTION
Make sure that the operation is smooth. It should be able to turn smoothly and be fully opened and closed.
•
If necessary, contact an authorized Nipponia service center.
•
Check tyre condition and wear.
•
Check for any potential damage to the wheels or tyres.
•
Inspect the air pressure of the tyre and adjust if necessary.
•
Make sure that operation is smooth.
•
Lubricate the lever joints if necessary.
•
Make sure that operation is smooth.
•
Lubricate pivot if necessary.
•
Check operation.
•
If necessary, contact an authorized Nipponia service center.
•
26
EN