Bazooka ELA265 Manuel D'installation page 12

Make the speaker connections using speaker wire that is at least 16 gauge or heavier.
As with any audio component, proper phasing of the amplifier and speakers is essential for
strong bass response. When connecting, make sure that positive (+) from the amplifier is
connected to the positive (+) of the speaker, and the same for negative (-).
4 Ohm 4 Ohm
(2 Ohm Minimum) (2 Ohm Minimum)
ELA1190, ELA1300, ELA1500 & ELA1800 SPEAKER CONNECTIONS
+ +
ELA265, ELA2100 & ELA2150 SPEAKER CONNECTIONS
ELA465 SPEAKER CONNECTIONS
S
PEAKER CONNECTIONS
FUSES
PROTECT
SP SP SP SP
25A 25A
POWER
SPEAKERS
- -
+ +
BRIDGED
LEFT RIGHT
PROTECT
POWER
SPEAKERS
4 Ohm 4 Ohm
- -
(2 Ohm Minimum) (2 Ohm Minimum)
CH1 CH3
BRI BRI
CH2 CH4
SPEAKERS
4 Ohm 4 Ohm
(2 Ohm Minimum) (2 Ohm Minimum)
Please note that although the ELA1190,
ELA1300, ELA1500 and ELA1800 are mono
amplifiers, we have provided two sets of
speaker terminals on the amplifier. These
terminals are connected in parallel
+12V REM GND
25A
internally (connected together). The
second set of speaker terminals are
intended for ease of connection when
running multiple woofers.
FUSE
+12V REM
25A
- -
+ +
PROTECT
FUSES +12V REM
25A
25A
POWER
(2 Ohm Minimum) (2 Ohm Minimum)
11
GND
GND
4 Ohm 4 Ohm