Ghost BARLY Manuel page 17

Menu Description
Addr Set Address
ChMd User Mode
SLMd Operation
Mode
Soud Sound Mode
Auto Auto Mode
Colo Fixed Color
Manu Manual
setting
diSP Display
Rotation
Ver Firmware
version
Addr - Releasing the DMX address
Press MENU to select ADDR, press ENTER to start setting. Use the
UP or DOWN keys to set the desired address. Then press ENTER to confirm.
ChMd - Selection of DMX mode
Press MENU to select CHND. Press Enter to start the adjustment. Select the DMX mode using the UP or
DOWN keys: successively 5CH, 8CH, 14CH, 26CH or 50CH. Press ENTER again to confirm your selection.
SLMd - Selecting the projector operating mode
Press MENU to select SLMD. then press Enter to start the adjustment. MAST, SL1, SL2 will be displayed.
Press UP or DOWN to choose Master (MAST), or Slave (SL1 & SL2), then press ENTER again to confirm
the selection.
Sub-Menu Description
A001 - A512 Setting up a starting DMX address of the fixture
5Ch / 8Ch/ 5 channel mode
14Ch /26Ch
8 channel mode
/ 50Ch
14 channel mode
26 channel mode
50 channel mode
Mast / Sl 1 Mast - Master mode
/ Sl 2
SL1 - Slave Mode synchronized
SL2 - Slave Mode desynchronized
So 0 - So 16 Sound Mode selection
(16 modes availables)
Au1 - Au16 Auto Mode selection
(16 modes availables)
Co 1 - Co 7 Fixed Color selection
(7 Colors availables)
Red Red selection
Gree Green selection
Blue Blue selection
dISP / dSIP dISP - display UP
dSIP - display DOWN
Vxx Vxx selection
Se00 - Se99 Sound sensitivity
setting
Sp1 - Sp9 Speed Chase
0-255 Intensity
adjustment
0-255 Intensity
adjustment
0-255 Intensity
adjustment