Ghost MEDUSA Manuel page 17

MENU
Menu Description
Dxxx
Set Address
IPxx Set IP Code
A1 Auto Mode 1
(Fixed mode)
A2 Auto Mode 2
(Chase in Jump
mode)
A3
Auto Mode 3
(Chase in Pulse
mode)
A4
Auto Mode 4
(RGB+Flower
Rotation)
A5 Auto Mode 5
(Strobe mode)
Rxxx
Red color
Gxxx Green color
Bxxx Blue color
Uxxx White color
When the projector is turned on, the characters on the display light up with a solid red dot. When a DMX
signal is presen, the red dot flashes.
dxxx - Setting the DMX address
Press MENU to select Dxxx, press Enter to start adjustment. Use the
UP or DOWN keys to set the desired address. Then press ENTER to confirm.
IPXX - Selection of the identifying number
(used in master slave mode to desynchronize the different projectors)
Press MENU to select IPXX, press Enter.
The display shows "IP01 to IP64". Select the desired identifier with the UP & DOWN keys.
Press ENTER to validate the selection.
AUTOMATIC modes
A1.XX - Selection of static mode
Press the MENU button until A1.XX is displayed. Press ENTER.
The display shows "A1.01 TO A1.18". Select the desired color with the UP & DOWN keys.
Press ENTER to validate the selection.
A2.XX - Selection of JUMP mode (the colors are linked one after the other)
Press the MENU key until A2.xx is displayed. Press ENTER.
The display shows "A2.01 to A2.32". Select the JUMP mode with the UP & DOWN keys.
Press ENTER to validate the selection.
Sub-Menu Description
D000 - D512 Setting up a starting DMX address of the fixture
IP .01-IP .64
A1.01-A1.18 Auto mode selection 1 (18 modes availables)
A2.01-A2.32 Chase speed adjust
(Flash)
A3.01-A3.19 Auto mode
selection 3 (19
modes availa-
bles)
A4.01-A4.19 Auto mode
selection 4 (19
modes availa-
bles)
A5.01-A5.19 Auto mode
selection 5 (19
modes availa-
bles)
R000-R255 Intensity adjustment
G000-G255 Intensity adjustment
B000-B255 Intensity adjustment
U000-U255 Intensity adjustment
A3.01-A3.32 Chase speed
(Flash) adjust
A4.01-A4.04 Fixed color se-
(Flash) lection
A5.01-A5.32 Strobe speed
(Flash) adjust