Publicité
Les langues disponibles
Les langues disponibles
SoXX - Audio mode selection
Press the MENU key until SOXX is displayed. Press ENTER.
The display shows "SO01" to "SO03". Select the mode with the UP & DOWN keys.
Press ENTER to validate the selection.
SnXX - Audio sensitivity selection
Press the MENU key until SNXX is displayed. Press ENTER.
The display shows "SN01" to "SN09". Select the desired sensitivity with the UP & DOWN keys.
Press ENTER to validate the selection.
SLAv - Selection of Slave mode
By default the projectors are in master mode, the projectors defined in slave mode, and connected using
a DMX cable to the master projector will react in a synchronized manner.
NB: There can only be one master projector in a master slave chain
Press the MENU button until SLAV is displayed. Press ENTER.
Press ENTER to validate the selection.
Note: During an extinction / re-ignition cycle the projector retains its last state
.
Page 18
Publicité
