Spengler LITESTICK Mode D'emploi page 2

1
Tête support d'ampoule
Bulb holder
EN > This material complies with the requirements of the 93/42/EEC Medical Device
DESCRIPTION
Directive.
Shock-resistant aluminium casing and handle clip.
Battery handle equipped with a LED bulb (2.8 V - 20 mA).
Accessories included: 2 LR03 AAA size alkaline batteries and 1 blade holder designed
INSTRUCTIONS FOR USE
for all conventional tongue depressors.
Unscrew the bulb holder and insert the two batteries into the handle making sure they
are aligned correctly (+) and (-). .
Inserting the batteries
Press the on/off black push button to switch the light on intermittently. Release the
button to switch the light off. To switch on the light permanently, press the upper part
MAINTENANCE
On/Off procedure
of the handle clip.
Unscrew the handle from the bulb holder, remove the low batteries and replace them with
two new LR03 AAA size alkaline batteries, making sure they are aligned correctly (+) and (-).
Replacing the batteries
Unscrew the bulb holder from the handle and remove the bulb from the holder by
pushing it from the outside towards the inside. Then insert the new bulb into the holder
WARNING
Replacing the bulb
by pushing it forwards.
Operating and storage temperatures:
• Do not soak, do not immerse into liquids.
• Avoid prolonged exposure to direct sunlight and to extreme temperatures.
• Place beyond children's reach.
• Remove batteries if the equipment is not to be used for a long time.
Fabricant/manufacturer: Spengler SAS
28, avenue Charles de Gaulle I F-36100 ISSOUDUN, France
spengler@spengler.fr I www.spengler.fr
https://www.realme.fr/2598-lampe-stylo-spengler-litestick-avec-support-abaisse-langue.html
2
Ampoule à LED
LED bulb LR03 AAA size batteries
5
4
Manche
Handle
Piles LR03 AAA
+ 10°C to + 40°C.
6
7
Clip de fixation
Handle clip
Poussoir Marche/Arrêt
On/Off push switch
Made in ROC for Spengler