Publicité
Les langues disponibles
Les langues disponibles
Installing Your Gate
STEP 1
Place your expandable gate in an opening no smaller than 22 inches and no larger than
38 inches wide.
NOTE: If the opening has a baseboard or molding near the floor, be sure to place the gate
above the molding so that the gate is installed on a vertically even surface.
STEP 2
With one hand on each side
of the gate frame, pull away
from the center until the gate
spans the entire length of your
doorway or opening.
NOTE: Be sure to pull from the outside frame of the gate, NOT the inner round bars.
ENGLISH
3
Publicité
