Ebode HD60GH Guide Utilisateur page 4

6. PRODUCT OVERVIEW
Front View
1. Link LED: Connection status indicator light.
a) Off: Device is powered off or in Sleep mode.
b) Blinking slow: Device has started radio transmission and not yet found the
other side of the link. If the device is a transmitter it is in scan mode
searching for a matching receiver. If the device is a receiver it is in beacon
mode, searching for a matching transmitter.
c) Blinking fast: Devices are connected, which means that the receiver and
transmitter have accepted each other and established a network.
d) On: Transmitter and receiver have established audio/video connection. At
this point the user should be able to see the transmission happening on the
display attached to the receiver.
2. Power LED: Illuminates when power has been supplied to the unit.
Rear View
Receiver
1. HDMI OUT: Connect this port to a HDMI equipped TV or monitor.
2. POWER: Plug the DC 5V power supply into the unit or connect to the source USB
port via USB to Micro-USB cable.
3. Button: The button has a variety of functions.
1. HDMI IN: Connect this port to the HDMI source.
30-3-2016 4
Transmitter
ebode HD60GH