XPower XD-85LH Mode D'emploi page 7

Installation and Operation Guide
Extension Setup (Optional)
Intake Ducting*
①
Install the intake adapter**.
②
Screw on the four screws.
* For model XD-85LH only.
** The intake adapter is sold separately.
③
Exhaust Ducting (Lay Flat) (12 inch/30.5 cm Diameter)
①
Screw off the two screws.
②
Take out the ducting frame.
③
Let the ducting hose go through the
ducting frame.
①
③
②
②
③
Attach the ducting hose to the intake
adapter.
①, ⑤
④
④
Turn the ducting hose around the
frame to its back.
⑤
Reinstall the ducting frame and screw
on the two screws.
(Continued)
English - 7