GRE L4PL Manuel D'instructions page 2

EN
READ THE INSTRUCTION MANUAL CAREFULLY BEFORE ASSEMBLY AND
USE. PLEASE ALSO SAVE IT FOR FUTURE REFERENCE.
CONTENT PAGE
1- Product introduction
2- Warning and Cautions
3- Assembly and Use Instruction
4- Parameter List
5. Product Explosion Diagram and List of Accesories
1- PRODUCT INTRODUCTION
A-Frame ladder adopts blow molding process and polyethylene material, which has strong corrosion resistance feature.
The whole ladder has been polished to ensure a nice foot touch. The treads has round embossments which effectively
prevents slipping. Enforced thick material guaranteed the safety and stability and durability. The ladder is suitable for
48 -54 height above-ground swimming pools. The external ladder is designed to be swung up. When the swimming pool
is not in use, the external ladder can be swung up and fi xed to prevent children from accidentally entering.
2- WARNING AND CAUTIONS
1. Locate ladder on a solid base.
2. One person on the ladder at a time.
3. Ladder MUST be installed and used per manufacturers instructions.
4. Face ladder when entering and leaving pool. DANGER: No Jumping or Diving from ladder.
5. Do not let children play with the ladder
6. In order to avoid injury during the installation and handling of heavy objects, it is recommended to carry them together
by two people.
7. To prevent entrapment or drowning " DO NOT swim through, behind or around ladder. DO NOT install the ladder at
the suction point.
8. Weight limit - 250 lbs maximum Warning: Exceeding the maximum weight restriction may cause the ladder to fail.
9. When ladder is not in use ,lock up outer treads.
3- ASSEMBLY AND USE OF INSTRUCTION
1. Remove the A-Frame ladder and its accessories from the box and check whether all the accessories are complete.
2. First place the bottom tread on a fl at surface with the grooved side facing up; then snap the two holders into the
groove;