Cleaning The Dust Cup - Fuller Brush Co. Spiffy Maid FB-SPFM.2 Mode D'emploi

1. Push the dust cup latch to remove
the dust cup from the vacuum (Fig. 1).
2. Remove the floor nozzle from
the dust cup by pressing the red
button on the nozzle neck and
pulling the floor nozzle out of
the dust cup (Fig. 2).
3. Remove the cyclonic filter holder
(Fig. 3).
4. Shake out remaining dust and
rinse with water. Make sure all
pieces are completely dry before
replacing in the vacuum.
5. Replace the cyclonic filter holder.
6. Replace the dust cup onto the
vacuum (Fig. 4). Then replace
the floor nozzle and resume
vacuuming (Fig. 5).

Cleaning the Dust Cup

Fig. 1
Fig. 3
10
Fig. 2
Fig. 4
Fig. 5