Hang Installation; Intake And Exhaust - Bullmax Bullfan BF-150ZECV2 Manuel D'utilisation

3. Screw the fan onto the wall
5. Connect the speed control to the fan and make
sure the connection is in place and fastened

5.3 HANG INSTALLATION

5.4 INTAKE AND EXHAUST

This fan can be used as either an intake fan or exhaust fan in grow rooms or tents to achieve optimal whole
space ventilation.
- Used as the intake fan or opening: If its not used as a fan, it must be situated at a bottom corner
of your grow space.
- Used as the exhaust fan: It must be hung (shown above) or mounted at the highest opposite corner.
ENVIRONMENTAL PROTECTION
This symbol indicates that this product must not be placed in general household waste. It
should be sent to a separate recycling facility for recovery, check local authorities for details.
By responsible recycling and separating this product from other household waste it will help
protect the environment and human health, as the volume of waste sent to incinerators or
land-fills will be reduced and natural resources conserved.
4. Connect the ducts on two sides with clamps
6. Power up the fan
EN