Setting The Time; Bluetooth Pairing; Bluetooth Play Operation; Fm Radio Operation - i-box Glow Mode D'emploi

Battery backup
In addition to the DC In power supply you can fit 2 x AA batteries (not supplied) in the
battery compartment (16) to provide a backup power supply. If the mains supply is
disconnected or interrupted the power supply is automatically switched to the backup
battery, so that the time and alarm settings are not lost. Please Note: speaker, radio
and charging functions will not operate when the Glow is powered solely by the back-
up batteries. When fitting the batteries make sure their polarity matches the markings
in the battery compartment.

Setting the time

1. Plug in the AC/DC power adaptor supplied, the default time 0:00 will appear in
the LCD display (5).
2. Long press the clock
(4) keys to switch between 24hr and 12hr clock setting.
3. Then press the
to change the hour.
4. Press the clock key (3) to set the minutes use the
change the minutes.
5. Press the clock key (3) again to confirm the time set.
To reset the clock, long press the
steps 2-5 above.

Bluetooth pairing

1. Press the mode key (1) twice to enter Bluetooth pairing mode. "bt" will appear in
the display and also the Bluetooth symbol which will flash.
2. Place the device you want to pair with your Glow within 1m of it, enter your
device's Bluetooth menu and select "i-box Glow" in the device list. When your
Glow and device are paired, you will hear a chime and the Bluetooth symbol which
will stop flashing.
Once paired with a device the Glow will reconnect automatically when switched to
Bluetooth mode if the paired device is within range.

Bluetooth play operation

While listening to audio in Bluetooth mode:
+
1. Press Volume /
2. Press the Next (4) or
3. Press the Pause/Play key (3) to play or pause the track.

FM radio operation

1. Press the Mode key (1) repeatedly until FM and an FM frequency appear in
the LCD display.
2. Long press the
frequencies to the previous or next radio station.
06 | Glow
key (3), the LCD will display "24hr" press the
clock key (3) again to set the hour use the
mode key (1) to enter standby mode then follow
-
keys (8/9) to increase or reduce the volume level.
Previous (2) keys to play the next or previous track
(2) or (4) keys to scan backwards or forwards through the
(2) or
(2) or (4) keys
(2) or (4) keys to
.