Legamaster e-Screen PTX-6500 Guide D'installation Rapide page 5

4  Operating the monitor
The side controller of the monitor
 OSD Key Pad function List
Key Description
Power Power on/Power off
Source Source selection (toggle)
 Menu Right/Volume +
 Menu Left/Volume -
 Menu Up
 Menu Down
Menu/Exit Menu/Exit selection
 LED ON:
Power Status Condition
Green Power on
Orange Power off
Power saving mode
Select LED on via menu
(Front LED: On)
Flashing orange No signal
Off AC off
Power on
Select LED on via menu
(Front LED: Off)
 LED OFF:
The LED turns completely off when in the „off" mode
regardless of the monitor being on or off.
The Remote Control (RCU) Instructions
No Function Description
1 Turns the monitor on and off

2 INFO Provides source and resolution information
3 VGA Selects the PC RGB source
DVI Selects the PC DVI source
HDMI 1 Selects the HDMI source 1
4 COMP not available
AV (Video) not available
HDMI 2 not available
5 PIP position not available
DisplayPort Select the DisplayPort source
6 PIP
S-V
HD-SDI 2
7 SWAP
8 P-SOURCE
9 MENU
, , , 
10 EXIT
11 ENTER
12 SCALING
FREEZE
MUTE
BRIGHT
CONTRAST
AUTO
Power ON-Stand
SOURCE
by Indicator
VOLUME-
Remote Control
Receiver
VOLUME+
 Hot Key: OSD Menu Lock/Unlock Control
Lock: Press Enter, Enter, Exit, Exit, Enter and Exit
on the controller in sequence to lock OSD
Unlock: Press Enter, Enter, Exit, Exit, Enter and Exit
on the controller in sequence to unlock OSD
Display Mode
Turning the monitor on
1. Correctly insert the power cord into the monitor and
into the power socket
2. Ensure the AC switch is set to "—".
3. Press the power button on the remote or side control panel.
Turning the monitor off
With the power on, press the power button on the remote or
side control panel to place the monitor in a standby mode. To turn
off power completely, turn the AC switch to "" or disconnect
the AC power cord from the power outlet.
NOTE:
If there is no signal input for a period of time, the monitor will
automatically revert to standby mode.
not available
Hot Key for
2
OPS source selection
not available
no function
4
no function
Opens the monitor's
6
on-screen menu
7
system.
If the menu
9
system is already
open, pressing this
11
button will select the
previous submenu
Navigates through
submenus and
settings
Closes the menu
system
Selects highlighted
menu choices
Toggles between
different aspect ratios
(Auto, Native, 4x3,
16x9, 16x10 and
Letterbox)
Freezes the current source image
Turns off the sound
Adjusts the brightness
Adjusts the contrast
Synchronizes the monitor with the source
Allows selection of the different sources
Decreases the sound volume
Increases the sound volume
1
3
5
8
10
12
5