Rack-Mounting The Unit - Sony WD-850 Mode D'emploi

Rack-mounting the unit

Note
Take caution when mounting the unit on the rack, and
avoid getting your fingers caught between the unit and
rack.
1
Remove the four feet from the bottom of the unit in
advance.
Foot
Pin
Bottom panel
WD-850
2
Mount the unit on the rack using screws that are at
2
least 10 mm ( / in.) long and that match the diameter
5
of the screw holes on the rack.
Rack
WD-850
Screws
Remove the pins inside the
feet with a small screwdriver
or similar tool.
Removing the mounting brackets
You can remove the rack mounting brackets from the unit
if you do not intend to mount it in a rack.
11
Rack-mounting the unit