ReVent RVLH50 Mode D'emploi page 20

11.) Select desired LED color temperature by sliding the selector switch on the
back of the SHIELD.
12.) Connect LED wire to LED plug. Attach the SHIELD by squeezing the
mounting springs together and inserting the springs into the spring guides in the
FAN.
Care and Cleaning
WARNING: To reduce the risk of electric shock, fire, or injury to persons,
disconnect or turn off the breaker and lock the power supply at the panel to
prevent the power from being turned on before servicing or cleaning the unit.
1.) Remove the SHIELD by squeezing the springs and pulling down.
2.) Remove dust and dirt from the FAN with a vacuum cleaner.
3.) Dampen cloth with dish detergent. Wipe the FAN and dry with a cloth.
4.) Replace the SHIELD.
SHIELD
LED plug
LED wire
19
warm white (2700K)
bright white (4000K)
daylight (5000K)
spring guide
mounting springs