5. Crank the Handle to bring the Plunger to the top of the Stuffer.
6. Rest Canister's Bottom Brackets onto the
Canister Mounts inside the Housing of the
Stuffer. Pivot the Canister fully into the Stuffer
Housing, snapping the Top Brackets into the
Canister Mounts. ( figure 5)
7. Insert the Stuffing Funnel of choice through the Front Ring Nut. Screw the Front Ring Nut and
Stuffing Funnel onto the mouth of the Canister until snug. DO NOT OVERTIGHTEN the Front
Ring Nut, as it may damage the Funnel. ( figure 6)
Slow Gear shaft
Fast Gear shaft
4