Maintenance - Veridian ENDEAVOR Mode D'emploi

MAINTENANCE

CHARGING THE VACUUM CLEANER:
Insert the charger into the vacuum cleaner. When the charging indicator light is flashing red, the vacuum cleaner is being charged. When the charging indicator
light turns from red to green, the vacuum cleaner battery is fully charged.
NOTE:
When the charging indicator light is flashing red during use, it means the battery is running low on power.
CAUTION!
Do not try to open the battery and repair it yourself.
NOTE:
This vacuum cleaner is specifically provided with the function of halt in charging. When the vacuum cleaner is being charged and the charging
indicator light is red, the vacuum cleaner cannot be enabled even though the switch button is pressed down.
STORAGE
1.
Place the cleaner into the Wall Mount Holder with the wand and Power Head attached.
2.
Place all accessories on the corresponding hook.
NOTE:
If you are not going to use the machine for a long period of time, please remove the
battery from the machine to maintain the battery life.
IMPORTANT!
Turn off the cleaner and remove the battery before conducting any
maintenance tasks. It is recommended to clean the dust canister after
each use or when dust is up to the max fill line.
EMPTYING THE DUST CANISTER
1.
Press the dust release button to open the bottom cover to empty the dust canister.
CLEANING THE DUST CANISTER AND FILTERS
1.
Press the canister release button, while also pulling the canister away in a downwards and
outward direction.
8