Konyks Senso Charge Mode D'emploi page 9

5. Put ON/OFF switch to ON
6. Press Reset button for 5 seconds then
release. Red Led should blink rapidly
7. Open Konyk App on your phone then
click on the
screen to add a device
8. Choose "Senso Charge"
9. Enter your Wi-Fi password and click
Next (pay attention to upper and lower
cases)
10. Follow the on-screen instruction. Wait
20 to 30 seconds for install. It is now
ready to use
Slide the cover at the
back to release ON/OFF
and Reset buttons
+ at the top right of the
9