Connect And Disconnect; Using Bluesoleil - Mr Handsfree Blue Dongle II Mode D'emploi

CONNECT
There are two ways to setup a Bluetooth
1. Select a remote device and double click it to refresh its services. Bluetooth
be asked if security level of either side of the connection is set to "High" and they are not
paired devices. After service searching finished, the services that the remote device
supports are found and the corresponding service icons on the top of the main window
will change to be pink color.
2. Select a remote device and double click it to refresh its services. Bluetooth
be asked if security level of either side of the connection is set to High and they are not
paired devices. After service searching finished, the services that the remote device
supports are found and the corresponding service icons on the top of the main window
will change to be green color.
DISCONNECT
Select the remote device first and right click the service icon on the top of the main window. On
the pop up menu, select Disconnect.
Select the remote device and right click the device icon. On the pop up menu, select
"Disconnect/submenu" (the connection you want to disconnect).
The remote device side can disconnect the connection directly.
®
If the local Bluetooth device is removed or the remote device is removed, all the connections will
be disconnected. If the remote device moves out of the radio range, all the connections with the
remote device will be disconnected after about 1 minute.
AN EXAMPLE TO USE "BLUESOLEIL" PROGRAM
Please follow the instructions below:
1. Click the Bluetooth
program.
Or click "BlueSoleil" on your screen.

CONNECT AND DISCONNECT

®
connection:

USING BLUESOLEIL

®
Icon located right hand side of the taskbar to open "BlueSoleil"
GB-10
®
passkey may
®
passkey may