Brandson Equipment 303584 Mode D'emploi page 11

• Press the "ON/OFF" button to start the device.
• Press the "mm/inch" button to select the desired unit.
• Press the "Zero" button to define the zero point of the device and to reset the
current reading to 0.
Notes:
• To reset the device to the default zero point, push the jaws of the callipers
together until they are touching and then press the "Zero" button.
• For more accurate measurement results, we recommend that you take a
second reading.
6. Types of measurement
Inner dimensions of objects
Outer dimensions of objects
English
10.43mm
10.43mm
11