Ombréa 15-712652 Notice De Montage page 91

If everything fits perfectly, you should be able to fix all the blades together.
Installation of the blades
Step 1 : Position the 2nd blade of the B and B3 beam vertically with the H handle.
Step 2 : Take the part G and the pins S.
Step 3 : Position the 1st blade vertically and insert the part G (see diagram on next page) - insert
the pins S to maintain the blades. This should be done simultaneously on both sides, 2 people are
needed.
Repeat this operation to fix all the blades to the part G.
Step 4: Check that the mechanism is working properly once the installation is complete.
Repeat this procedure in order to fix the blades of the posts B1 and B2 to the G piece.
91