Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Installation information for the base
The base has specially shaped fixing holes that allow an easy and fast installation. Two hole
distances are available: 51 mm and 60 mm. There is a mark on the exterior of the base to
indicates the position of the LED once the detector has been fitted. This ensures that the detectors
are aligned uniformly when the base is mounted.
Wiring is possible both from the back or the side (knock-outs in the base).
A marking inside the base indicates how long the cable needs to be stripped. The 5 connection
terminals are arranged in such a way that there is sufficient space for the wiring work. The
terminal screws are captive screws and will not fall out of the terminals. The base is supplied
with the screws unscrewed, which makes the wiring work even easier.
The detector is locked into the base by simply turning it clockwise. An additional anti-theft fea-
ture is included. A missing detector means alarm.
Wiring diagram
The hand switch (if the RZ-24 central is not installed in a position where the hand switch on
its cover could be used) needs to be placed in the wiring to the first detector. This allows for a
simple, linear wiring.
Questions?
We'll be happy to help! Just contact us!
4
Installation instructions - Heat detector RM 4000
DICTATOR Technik GmbH · +49 (0)821 246730 · info@dictator.de · en.dictator.de
The number of required lintel
and ceiling detectors is de-
termined by the applicable
national regulations in each
respective country. In Ger-
many it is based on the DIBt
approval or type approval. In
other European countries with-
out national directives the EN
14637 serves as orientation.
The smoke detectors are sim-
ply wired in line. A resistor
with 3.9 kΩ resistor has to be
installed in the last detector of
the loop.
Publicité
