Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
WARNING
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1
Disconnect power
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
2
Shut off water supply
Shut off the water supply to the dishwasher.
3
Do you already have utility
hookups?
Yes
—Follow instructions in the "Prepare Cabinet
Opening—Existing Utilities" section.
No
—Follow instructions in the "Prepare Cabinet
Opening—New Utilities" section.
Existing utility hookups
Water line
Cable
6
No existing utility hookups
Prepare Cabinet Opening—Existing
Utilities
1
Check water and electrical
placement
Water line
If the water line and the cable extend to the locations
shown, proceed to the "Install Drain Hose" section. If they
do not reach far enough, follow the instructions in the
"Prepare Cabinet Opening—New Utilities" section.
Prepare Cabinet Opening—New
Utilities
Prepare and route the electrical supply
What type of electrical
connection will you use?
Power Supply Cord:
Follow Option A instructions
Direct Wire:
Follow Option B instructions
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a
cabinet next to the dishwasher cabinet opening.
1
Power Supply Cord–Drill hole
1-1/2"
(3.8 cm)
Drill a 1-1/2" (3.8 cm) hole in cabinet side or rear.
See product and cabinet opening dimensions.
Cable
Optional location
Optional location
Optional location
Preferred location
Preferred location
Preferred location
Publicité
Chapitres
Table des Matières
