Vasner Appino BEATZZ Mode D'emploi page 22

VASNER
5.
6.
6.
7.
Installation
1. Remove the heater from its packaging and remove any packaging
materials from the heater and accessories. It is particularly important to
remove the foam strips that protect the bars during transport. Carefully
pull these strips away from the heater in the direction of the arrow.
If you have tested the heater function before installing it, allow it to cool
before installing it.
2. Next, carefully choose where the heater is to be installed.
The heater can be installed under the following circumstances:
a. On the wall using the wall/ceiling bracket
b. On the ceiling using the wall/ceiling bracket
c. Optional: On an umbrella using the umbrella
bracket available separately
d. Optional: On fixed horizontal objects using the chain brackets available
separately
22
8.
4.
3.
2.
9.
10./11./12.
GB
1.