Warranty - Haussmann PNT210-B Manuel De L'utilisateur

TROUBLESHOOTING
PROBLEM
Air is leaking near the top of the tool or
the trigger area
Tool does nothing or operates
sluggishly
Air is leaking near the bottom of the
tool
Tool is jamming frequently

WARRANTY

Thank you for investing in a HAUSSMANN power tool. These products have been
made to demanding, high-quality standards and are guaranteed for domestic use
against manufacturing faults for a period of 36 months from the date of purchase.
This guarantee does not affect your statutory rights. In case of any malfunction of your
tool (failure, missing part, etc.), please contact one of our service technicians at our toll
free service line at 1-866-206-0888 from 8 AM to 6 PM, Monday to Friday, Eastern
time. RONA reserves the right to repair or replace the defective tool, at its discretion.
The product is guaranteed for 36 months if used for normal trade purposes. Any
guarantee is invalid if the product has been overloaded or subject to neglect, improper
use or an attempted repair other than by an authorized agent. Heavy-duty, daily
professional or hire usage are not guaranteed. Due to continuous product
improvement, we reserve the right to change the product specification without prior
notice.
REGISTER YOUR PRODUCT
We invite you to register your product online to make future communications easier.
To do so, simply visit our website www.haussmanntools.com.
22
PNT210-B
CAUSE
Loose screws
O-ring is possibly worn out
Inadequate air supply
Inadequate lubrication
O-rings or seal is worn or damaged
Loose screws
O-ring is possibly worn out
Incorrect fasteners
Damaged fasteners
Magazine or nose screws are loose
Magazine is dirty
Driver is worn or damaged
CORRECTION
Tighten the screws
Replace damaged or worn O-ring
Make sure the air supply is correct
Place two or three drops of air tool oil
in the tool's air inlet
Replace damaged or worn O-rings and
seals
Tighten the screws
Replace damaged or worn O-ring
Supply approved fasteners of the
correct size
Replace and discard damaged
fasteners
Tighten screws
Clean the magazine
Replace damaged or worn
components