Cleaning & Maintenance - Igloo ICEBNH26BL Instructions Et Recettes

CLEANING & MAINTENANCE
Your AUTOMATIC ICE MAKER is equipped with an automatic cleaning function
to help clean the interior of your unit, including the water lines. Following
these steps will help to maintain the unit and add to longevity.
1. Remove the Ice Basket, then drain any leftover water by unplugging the Water
Drain Plug on the bottom of the unit. Replace the Water Drain Plug.
2. Prepare your cleaning solution.
Common cleaning solutions:
• Vinegar and water (ratio of 1:1)
• Lemon and water (ratio of 1:1)
• Bleach and water (ratio of 1 tsp. bleach : 2 qts. water)
• Commercial ice maker descaling and cleaning solution
3. Make sure unit is plugged in and the POWER indicator light is not
illuminated. Add cleaning solution to the Water Reservoir.
4. Press the SELECT button until the CLEAN indicator light is illuminated.
Then press the ON/OFF button to start the cleaning cycles. The unit
will automatically cycle the cleaning solution 5 times.
5. When the cleaning cycles have completed, drain the interior water by unplugging
the Water Drain Plug on the bottom of the unit. Replace the Water Drain Plug.
6. Clean the remainder of the interior and the exterior of the unit
using warm, soapy water and a non-abrasive towel.
7. Drain the interior of any remaining water by unplugging the Water Drain
Plug on the bottom of the unit. Replace the Water Drain Plug.
8. Fill the Water Reservoir with fresh water.
9. Press the SELECT button until the CLEAN indicator light is illuminated.
Then press the ON/OFF button to start the cleaning cycles. The
unit will automatically cycle the fresh water 5 times.
10. Drain the interior of any remaining water by unplugging the Water Drain Plug on the
bottom of the unit, then dry with a non-abrasive towel. Replace the Water Drain Plug.
11. Before storing, keep the Clear Lid open and allow unit to dry completely for 24 hours.
8