Publicité
Les langues disponibles
Les langues disponibles
5
Mounting
5.1
Mounting the product
MEDIUM ESCAPING UNDER PRESSURE
•
Verify that there is no pressure in the system.
Failure to follow these instructions can result in death, serious injury or
equipment damage.
ESCAPING GASES
•
Verify that the product is only installed in dry, well-vented rooms.
Failure to follow these instructions can result in death, serious injury or
equipment damage.
Any mounting position is permissible.
1. Screw the product onto a T piece of the gas line so that it is tight.
- Verify correct direction of flow (indicated by an arrow on the product)
2. Firmly screw in the pressure gauge.
- Seal materials: DIN 3535 T3, T4; DIN 30660/30661; CU profile seal
Mounting
WARNING
WARNING
Pressure gauge push-button stop cock
EN
11
Publicité
