Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
ATTACHING WORK LIGHT HEAD TO STAND
1. Place the stand (9) on a flat surface.
2. Position the U-Shaped bracket (3) of the work light head against the stand (9) as shown in FIG 1.
3. Use the locking knob (6), flat washer and spring washer to secure the work light head on the stand.
ADJUSTING THE LIGHT DIRECTION
Your work light can be tilted vertically up to 30° down or 90° up.
To Adjust the Light Direction,
retighten knobs.
SWITCH ACTION
Your portable work light is equipped with a rocker switch (7) located on
the back side of the work light.
Press the switch on the left side marked "I" to turn on the work light at
7500 lumens. Press the switch on the right side marked "II" to turn on
the work light at 15,000 lumens. Turn off the work light by setting the
switch in the middle position "O". See FIG 2. Always turn the work light
off before unplugging.
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
Use similar care for the stand.
WARNING:
completely cool before attempting to clean it.
This product is warranted free from defects in material and workmanship for 5 (Five) years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 5 YEAR WARRANTY.
For questions about this or any other PowerSmith™ product,
888-552-8665.
Please call Toll-Free:
www.powersmithproducts.com
Or visit our website:
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
English
OPERATION
loosen the side locking knobs (5). Adjust the work light head to desired position, and
MAINTENANCE
Always make sure the work light is unplugged and
WARRANTY
HELP LINE
4
7
FIG 2
Publicité
