Publicité
Les langues disponibles
Les langues disponibles
Packing List
Part Name
Quantity
Remote Controller
1
Main-body Assembly
1.Open the package, take out the support pole
and base, insert the pole into the base and
make sure the release button of pole be on the
top side. Then screw up the base and pole with
the M8 screw.(Picture 1)
2.Take the fan assembly out and install it to the
support pole, when a "click" sound is heard, the
installation is finished.(Picture 2)
Note：
1.Please hold the motor & control part tightly when you
assemble or disassemble the fan to prevent the pinch of
fingers.
2.When you don't use the product and want to put it
away, just disassemble the it in the reverse order of
the assembly.
Connection of the Power Adapter
Take out the power adapter, insert the plug into
the socket,and connect the other side to the
bottom interface of the base, then it's done.
(Picture 3)
Note：
Please make sure the input voltage is 220V-240V,
keep the plug and your hands dry before you touch
the plug and insert it into the socket.
Fan
Support Pole
1
Coin Battery
M8 Screw
1
Base
1
1
Wrench
1
1
1
Pole
Base
2
3
Power Adapter
1
User Manual
1
Wrench
M8 Screw
Fan Assembly
3
Publicité
