Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
NOTE: The display will enter sleep mode after 30 seconds of inactivity, but the
fan will continue to run. Press the
press any other button to wake up the display.
3.
Press the
button or
one of the following modes:
Icon
Mode
Ion
Fan
Sleep
AI
4.
Press the
button once to enter the timer mode. Next, press the fan's
or use the +/- buttons on the remote control to set the timer so that the fan will turn off
after 1-12 hours (depending on the time set). To deactivate the timer, set the time to 0h.
5.
Press the
button to oscillate the fan and rotate it 60 degrees. Press the
stop it.
NOTE:
•
After 15 hours of continuous operation, the fan's safety function will
automatically turn off the fan.
•
When you turn off the fan, it will remember the last settings and use these
when next turned back on. However, the speed in AI mode or timer settings
will not be saved.
6.
To turn off the fan, press the
from the mains socket to completely switch it off.
button to completely switch off the fan or
button on the fan and remote control, respectively, to select
Description
Purifies the air. This mode can only be used in fan mode.
Press the fan's
button repeatedly or the +/- buttons on the
remote control to select a fan speed from 1 to 10.
Press the fan's
button repeatedly or the +/- buttons on the
remote control to select a sleep speed from 1 to 3.
The fan will automatically adjust the speed level according to
the changes in ambient temperature.
NOTE: When the ambient temperature exceeds 40 °C, the
fan will remain on the maximum speed. When the ambient
temperature drops below 10 °C, the fan will remain on the
lowest speed.
button. The screen will then turn off. Unplug the unit
18
EN
button repeatedly
button to
Publicité
Chapitres
Table des Matières
