Ergon BP1 Protect Mode D'emploi page 13

ERGON BIKE ERGONOMICS
5.
The desired size is set correctly when the size indicator beco-
mes visible right above the "Length Adjustment"
down the Velcro with the flat hand.
6
7.
Turn the BP1 Protect and thread the strap
ded eyelet complying with the adjusted size.
7
7
6.
Then completely slide the protector
. Now press
6
8.
into the provi- Thread the strap
1
little tension. Now press the strap onto the Velcro and lower
the strap end into the intended insertion opening
1
through the little flap
1
1
8
14
EN
in the intended pocket.
2
2
and pull with a
3
.
8
3