Publicité
TOOLS
WARNING!
Please read these operating instructions carefully and note the information given. Use these
operating instructions to familiarize yourself with the product, the proper use and the safety
instructions.
The Hose Reel is provided with auto rewind system and intended for use in the private home and
hobby garden or car washing etc.
The product could not be used to transmit drinking water!
Technical data
Model
HAW01220
Int. diameter hose
Hose length
20 + 2 m (PVC)
Fitting
Max. pressure
Weight
Dimensions
Installation
1. Take out the unit and accessories from the box.
2. Choose a suitable place near a source of water.
3. Take the mounting bracket as a template to mark the position of the screws,
and drill four holes in the wall (fig. 2).
4. Fix the bracket by four self-taping screws accordingly (fig. 1).
5. Connect the reel to the mounting bracket.
Note:
•
The reel can be installed to a wall/post.
•
It is suggested to mount the reel approximately 1 meter above the ground.
Operation
Connect the leader hose to the water source.
Unwind
Pull out the cable to desired length and stop after "KAKA" sound is heard.
Roll up the hose
1. Release the lock by one more pull and let the hose back.
2. Turn off the faucet, loosen the connector of lead hose.
Storage
Cleaning
The hose box is maintenance-free and must not be cleaned.
Maintenance
When not in use, please turn off the source of water and turn on the nozzle to release the pressure.
The reel can not be used to transmit any chemical and substances.
When not in use for an extended period of time, it is recommended to be stored in a cool and dry place.
Trouble shooting
If the hose could
Pull out all the hose, then it is locked,
not retract
and left no more length to unlock
Spring is fatigued
HAW01230
13 mm
12.5 mm
30 + 2 m (PVC)
3/4''
10 bar
9.10 kg
10 kg
510 x 275 x 470 mm
HAW01220 - HAW01230 - NLFREN - v1.0 - 23082016
Description
1. Hose reel
2. Mounting bracket
3. Expanding bolts
Fig. 1
Go through the window to turn the reel for half a turn in the
direction of hose being pulled out
Please re-preload the spring for 1-2 turns: remove the small
cover, use spanner to clamp the groove of preload wheel,
unscrew four bolts on the wheel, then rotate it for 1-2 turns in
clockwise, then fasten the bolts, and replace the cover (fig. 3)
4
EN
Fig. 2
Fig. 3
Publicité
