Publicité
Liens rapides
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
Email: info@dreamonme.com
www.dreamonme.com
Read all instructions before assembling crib.
Save instructions for future use.
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
NUMÉRO DE MODÈLE:680
s
1
ITEM NO: 680
Publicité
Manuels Connexes pour Dream On Me DOM FAMILY 680
Sommaire des Matières pour Dream On Me DOM FAMILY 680
- Page 1 ASSEMBLY INSTRUCTIONS Dream On Me Inc. 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 ITEM NO: 680 Email: info@dreamonme.com www.dreamonme.com NUMÉRO DE MODÈLE:680 Read all instructions before assembling crib. Save instructions for future use. Adult assembly required. Small parts may present choking hazard prior to assembly.
- Page 2 . Never use this product if there are any loose or missing fasteners, loose joints,broken parts, or torn mesh/fabric. check before assembly and periodically during use. Contact DREAM ON ME for replacement parts and instructional literature if needed. . Never substitute parts, the product including side rails, must be fully erected prior to use.
- Page 3 Ne jamais utiliser ce produit s'il y a des pièces desserrées ou manquantes, des joints lâches, des pièces cassées ou maille/tissu déchiré. Vérifiez avant le montage et périodiquement pendant l'utilisation. Contactez DREAM ON ME pour les pièces de rechange et des instructions, si nécessaire. Ne jamais substituer les parties, y compris le produit des rails latéraux, doivent être complètement érigé...
- Page 4 de transport ou tout autre film plastique pour recouvrir le matelas non vendu et conçus à cette fin, ils peuvent provoquer la suffocation. ATTENTION: Tout matelas utilisé dans ce lit doit être au moins 27-1/4 pouces (690mm) par 51-5/8 pouces (1310mm), avec une épaisseur n'excédant pas 6 pouces (150 mm), les dimensions du matelas doivent être prises de la couture à...
- Page 5 CRIB COMPONENTS B:Side rails (2pcs) A:Front/Back rail (2pcs) C:The bottom bar (1pc) E:Left back leg (1pc) D:Mattress support (1pc) F:Right back leg (1pc) G:Left front leg (1pc) H:Right front leg (1pc) CONNECTION HARDWARE a:3”Allen head bolts (8pcs) b:2-1/8”Allen head bolts (8pcs) c:1-1/2”Wood Dowel (2pcs) d:Barrel nuts (16pcs) e:Allen wrench (1pc)
- Page 6 STEP1 Connect Left front leg (G) &Left back leg(E)to Side rail (B) by Allen head bolts (a) , Barrel nuts (d) and Allen wrench (e) . Assemble Right front leg (H) &Right back leg(F) to the other side rail in the same way . STEP2 Connect Left&Right back leg (E&F) to Rail (A) by Allen head bolts (b) ,...
- Page 7 STEP3 Locate the Mattress support (D) with tabs . Be sure the smooth side of the Mattress support is faced upwared . Position the tabs of the Mattress support (D) to mount to the selected position onto the legs . Insert the bolts (f) through the tabs and into thread inserts .
- Page 8 Converting crib to a toddler bed . (toddler rail and converting bolts are sold separately) Please note that the warning sticker is placed on the cribs to keep parents and caregivers informed it is a requirement by law under CPSC And ASTM. We do apologize for any inconvenience this may cause you.
- Page 9 WARNING FOR TODDLER BED USE Failure to follow these warning and the assembly instructions could result in serious injury or death from entrapment or strangulation. DO NOT place bed near windows where cords from blinds or drapes may strangle a child. DO NOT place items with a string,cord,or ribbon around a child’s neck,such as a hood, strings or pacifier cords.
- Page 10 Converting crib to a day bed You have the option to convert crib to a day bed . 1.Remove the Front rail (A) from the Left & Right front leg (G&H) as image shows, keep the screws for use of next step. 2.Assemble the bottom bar (C) to the Left&Right front leg (G&H) by Allen head bolts (b) Barrel nuts (d),Wood Dowel(c) and Allen wrench (e).
- Page 11 Converting crib to a full size bed II (Hollywood bed frame sold separately) PARTS REQUIRED TO COMPLETE STEP RIGHT FOOT PLATFORM LEFT FOOT PLATFORM RAIL POST x 1 POST x 1 POST x 1 NOT INCLUDED NOT INCLUDED NOT INCLUDED Conversion kit is sold separately You have the option to convert crib to a full size bed II 1:Remove the metal spring support platform (D),side rails(C).
- Page 12 Converting crib to a youth bed I (Hollywood bed frame sold separately) Conversion kit is sold separately You have the option to convert crib to a youth bed I 1:Use the right head board and left head board as the headboard and footboard of youth bed I;...
- Page 13 1532, S. Washington Avenue Piscataway, NJ 08854 E-mail: info@dreamonme.com www.dreamonme.com Follow us on @dreamonmeinc @dreamonmeinc to get your nursery featured on our social media. Enter our monthly giveaway! Chat with us! Simply scan the QRcode to register. For any questions or concerns or feedback.