Filling The Rinse Aid Reservoir - Infiniton DIW-6S12 Manuel D'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Filling The Rinse Aid Reservoir

1
Remove the rinse aid reservoir cap
by rotating it counterclockwise.
3
Close the rinse aid reservoir cap by
rotating it clockwise.
Adjusting the rinse aid reservoir
Adjust lever(Rinse)
Turn the rinse aid indicator dial to a number between 1 and 6.
The higher the number, the more rinse aid the dishwasher uses.
If the dishes are not drying properly or are spotted, adjust the
dial to the next higher number until your dishes are spot-free.
Reduce it if there are sticky whitish stains on your dishes or a
bluish film on glassware or knife blades.
11
2
Carefully pour in the rinse-aid into
its dispenser, whilst avoiding it to
overflow.
NOTE:
Clean up any spilled rinse aid with
an absorbent cloth to avoid
excessive foaming during the next
wash.

Publicité

Table des Matières
loading

Produits Connexes pour Infiniton DIW-6S12

Table des Matières