Maintenance Of The Chimney Hood - Infiniton CMPP-RU61 Manuel De L'utilisateur

6.2. Candle Type Halogen Bulb
• Bulb does not operate is possible to remove as shown in. (Figure 9)
• A new bulb with the same features is replaced with removed bulb.
• Remove the holder on the LED bulb. Put the new LED bulb on the
holder housing of the LED bulb you removed as shown in Figure 10.
Figure 9

7. MAINTENANCE OF THE CHIMNEY HOOD

• Device should be unplugged or switch should be turned off before
cleaning and maintenance procedures.
• Metal filter should be cleaned once a month with hot soapy water or
in the dishwasher, if possible. (60 °C)
• Remove the aluminum cartridge filter by pressing on the spring
catches on the side. Do not refit before drying after wash.
• Outer surface of the extractor hood should be wiped with a damp
cloth soaked with soapy water.
• Make sure electronic parts do not contact with water or similar materials.
• For inox products, using inox cleaning and maintenance products
available in the market will provide longer usage life for your device.
• Aluminum filters can be washed in dishwasher. After several washes,
aluminum filters may change colour. This is normal and filters do not
need to be replaced.
WARNING: When used with devices which use fuel (heaters working with
gas, diesel fuel, coal or firewood, water heaters, etc) and the air in the
environment; should be used cautiously. The chimney hood sending the
air out in the environment may affect the burning adversely.
This warning is not applicable to non-ducted use.
GB
12
Figure 10