Publicité
Les langues disponibles
Les langues disponibles
Atmos™ QRG
DMX Linking
DMX Connection
Mounting
Product
Mounting
Diagram
The Atmos™ will work with a DMX controller using a 3- or 5-pin DMX serial
connection. A DMX Primer is available from www.chauvetprofessional.com.
The Atmos™ uses a 3- or 5-pin DMX data connection for its 1 channel DMX
personality. See the User Manual for information about connecting and
configuring the product for DMX operation.
Before mounting this product, read the
mounting point per product. Make sure the mounting clamps (such as
CLP-15 from Chauvet) are capable of supporting the weight of the
product.
For
our
www.trusst.com/productcategory/accessories-clamps/.
Secure the safety cable using
Secure the safety cable using
the safety loops on the
the safety loops on the
product.
Mounting Clamp
Safety
Chauvet
line
of
product
Overhead Mounting
Floor Mounting
3
Notes. Use at least one
mounting
clamps,
Safety Cable
EN
go
to
Publicité
