Konyks Camini+ Démarrage Rapide page 8

8
1. Connect the USB charger to the camera (micro
USB socket at the back) and plug it
2. Wait for the camera to beep twice on 3 tones
and make 2 rotations - your camera is ready to
be paired
3. If during the first installation the camera does
not emit sound, press the reset button for 10s
then release. A three-note jingle should sound
4. Download the Konyks APP by following the QR
Code on page 2
5. Use an Android or iOS smartphone and connect
to a 2.4 Ghz Wi-Fi network
6. Open the Konyks APP (register if needed)
7. Click on
8. The APP prompts you to enter your Wi-Fi
password (be careful with upper and lower
case) then click on "Next"
9. A QR code will appear on your smartphone;
place it in front of the camera lens until you
hear a three-note jingle
10. Your camera is installed and functional. If not,
RESET the camera then start over
QUICK
INSTALLATION
+ at the top right then choose Camini+