LIMIT 1000-R Mode D'emploi page 7

Note: If line start flashing in normal operation it means that the pendulum is
outside self-leveling range.
2. Inclined plane
2.1 When the unit is turned on according to chapter 1.1, press the function key
(pos 3) once and the unit will go to battery saving mode and turn off the
lines.
2.2 Press function key once more and the lines will turn on and the unit is
now in incline plane mode which means the unit can be tilted to make an
inclined plane and the lines will NOT flash if outside self-leveling range.
2.3 Press function key once more to go back to normal mode.
Note: When incline mode the LED light will be turned on.
LED light
OFF
3. Battery installation
3.1 Open the battery cover, insert 2 AA batteries and shut off the battery cover.
Y
H
GB
5