Publicité
Les langues disponibles
Les langues disponibles
Lithium Cube™ 1200 by Wagan Tech
CHARGING THE LITHIUM CUBE
Before first use, charge the Lithium Cube to 100% (as displayed on the LCD screen).
Recharge after each use. When storing for long periods of time, it is recommended to charge the
battery once every 6 months.
CAUTION—RISK OF DAMAGE TO BATTERY:
•
Do not attempt to charge the Lithium Cube battery if it is frozen. A frozen battery
should be gradually warmed to 32 °F (0 °C) before charging.
•
Make sure the Lithium Cube is fully charged before first use.
CHARGING METHODS
Factory supplied equipment allows the Lithium Cube to be charged using:
AC Charging Adapter
Charge times
•
AC charger: about 8-12 hours
•
DC charger: about 12-16 hours
•
Solar panels: about 14 hours (depending on weather)
AC Charging Adapter
The Lithium Cube is supplied with a fully automatic AC charging adapter. To charge the Lithium
Cube using the AC Charging Adapter:
1. Connect the AC charging adapter to an AC wall socket.
2. Insert the charger's DC plug into the Lithium Cube's DC input socket.
3. Charging is complete when the light on the battery status reaches 100% and stops
flashing.
4. After charging the battery, disconnect the adapter from the AC wall socket first, then
from the device.
5. The Lithium Cube will shutoff automatically when not in use.
6
®
DC Charging Adapter
(Charging from your
vehicle as you drive)
www.wagan.com
Solar Panels
(not included)
Publicité
