diately renders the guarantee
void.
• Only have repairs carried out
at our authorised customer ser-
vice points.
• Observe the instructions for
cleaning and maintenance of
the machine.
• Store the appliance in a dry place
and out of reach of children.
Assembly
Pull out the mains plug.
This will prevent danger of injury
from electric shock.
1. Push the accessory holders (8) onto
the holders on the dirt container (7).
2. Fix each accessory holder (8) with a
Phillips screw.
3. Place the casters (9) into the acces-
sory holders (8).
4. Attach the carrying handle (2) firmly
using the cross-head screws (2a) sup-
plied.
5. Insert the filter:
- Foam filter for wet vacuuming
(
17),
- Material filter (
uming,
- Paper filter bag (
Never vacuum without a filter!
6. Place the motor housing (1) on top
of the dirt collector (8) and close it
with the clips (6).
7. Connect the vacuum hose (15) (bayo-
net fixing) and the accessories.
Operation
Fully unwind the suction hose
(
15) before commencing work.
18) for dry vacu-
19).
Switching on/off
Connect the mains plug.
Switching on the vacuum:
On/off switch (
Switching off the vacuum:
On/off switch (
Nozzle usage
Floor nozzle (
vacuuming of smooth surfaces and fitted
carpets.
Crevice nozzle (
gaps, corners and radiators.
Wet vacuuming
1. For wet vacuuming or to vacuum wa-
ter, fit the foam filter (17) to the filter
basket (22).
To avoid tearing the foam filter (17):
- Use only a dry filter;
- Before inserting, twist the edge
of the filter slightly and then roll it
back.
2. Suctioning up (draining) water: place
the suction hose (
dle (
16) into the water tank and
suction up the water.
3. Empty the waste container immedi-
ately after vacuuming because it is not
designed to store liquids (see "Clean-
ing/Maintenance").
Never reach into the water to be
suctioned up. Danger of electric
shock.
If the waste container is full, a
float closes the suction opening,
3) in position "I".
3) in position "O".
20): for wet and dry
21): for vacuuming
15) on the han-
GB
19