Turbo Brush; Suction Pipes; Accessories - domoova DHV40 Mode D'emploi

EN
Maintenance

Turbo Brush

Please make sure to clean the brush regularly for optimum
performance.
Release the latch under the Turbo Brush, then remove the rotating
cylinder brush (see the Turbo Brush diagram on page 6).
Remove debris (hair, dust) buildup on the brush and reattach the
brush. Make sure you reposition the release latch correctly.
NOTE: To reattach the brush, first insert the left side into the notches and then the
right side.

Suction pipes

Cleaning wand
Regularly check that the cleaning wand is not blocked by dust
buildup or other debris.
Hose (optional)
Check that the hose is not blocked by dust buildup or other debris.

Accessories

Crevice head, small brush head and optional accessories must be
checked and cleaned regularly to maintain optimum performance.
NOTE: If the accessories are not cleaned regularly, the vacuum's performance could
deteriorate.
14