Transportation Instructions - Veripart VPVK100 Mode D'emploi

TRANSPORTATION INSTRUCTIONS

The appliance should be transported only in a vertical upright position. The
packing as supplied must be intact during transportation. If during the course
of transport the product has been transported horizontally, it must only be laid
on its left hand side (when facing the door front) and it must not be operated
for at least 4 hours to allow the system to settle after the appliance is brought
back to upright position.
1. Failure to comply with the above instructions could result in damage to
the appliance. The manufacturer will not be held responsible if these
instructions are disregarded.
2. The appliance must be protected against rain, moisture and other
atmospheric influences.
Important!
• Care must be taken while cleaning / carrying the appliance to avoid
touching the condenser metal wires at the back of the appliance, as
you might injure your fingers and hands or damage your product.
• This appliance is not designed for stacking with any other appliance.
Do not attempt to sit or stand on
• top of your appliance as it is not designed for such use. You could
injure yourself or damage the appliance.
• Make sure that mains cable is not caught under the appliance during
and after carrying / moving the appliance, to avoid the mains cable
becoming cut or damaged.
When positioning your appliance take care not to damage your flooring,
pipes, wall coverings etc. Do not move the appliance by pulling by the lid or
handle. Do not allow children to play with the appliance or tamper with the
controls. Our company declines to accept any liability should the instructions
not be followed.
29