Methode Brigitte Kettner Microdermabrasion Guide D'utilisation page 4

USAGE GUIDE:
1. Charge your Microdermabrasion device for 3 hours be-
fore using it for the first time.
2. Select your treatment tip.
a. Normal (150 grit): for all skin types, except sensitive.
Good especially for thick and/or rough, dry skin.
b. Sensitive (180 grit): more suitable for acneic, thin, or
sensitive skin.
3. Turn on by holding down the button until the blue light
does not flash.
4. Select your suction strength by pressing the blue button
ONCE FOR LOW and TWICE FOR HIGH.
5. Follow facial diagram to make long, slow passes over the
entire face in an upward/outward direction. Make sure your
face is clean and dry. You may make more than one pass
(max recommended is 5) but if the skin becomes red or irri-
tated, stop treatment in that area. It is very important that
you maintain full contact between the skin and the exfolia-
tion tip to ensure steady suction. Do not stay in one place,
you must keep the device moving across the skin at all times.
CAUTION: DO NOT PRESS TOO HARD ONTO THE SKIN.
6. Once finished, cleanse the skin to remove any dead skin
that remains. Then hydrate the exfoliated area with serum or
moisturizer. If used during the day, always finish by applying
sunscreen.