EN
Dear Customer!
In case of any questions or comments on the purchased product, please contact
us: help@lionelo.com
Before using the product, please read the included user manual carefully.
The product has been tested and meets all the requirements of EN 14619:2019
standard.
WARNING:
Before using Luca scooter please read the included user manual carefully. The
user manual is an integral element of the product. Therefore, keep it with the
packaging for future reference. Always keep children in sight when they are
using the product.
Producer:
BrandLine Group Sp. z o. o.
ul. A. Kręglewskiego 1, 61-248 Poznań, Poland
GENERAL NOTES
The product should be assembled by or under the supervision of adults. Incorrect
assembly of the scooter may result in serious injuries to its user and other people.
UNFOLDING LO-LUCA SCOOTER
• Release the quick assembly lever and loosen the securing screw (fig. 1).
• Pull up the retaining bracket and unfold the scooter's frame. The screw and
the bracket will automatically fit into the guide (fig. 2).
• Tighten the securing screw and secure the quick assembly lever (fig. 3).
• Pull the handle out of the plastic holder and insert it into the handlebar guide
so that the locking part locks into the hole. Repeat the procedure with the
other side (fig. 4).
• Adjusting the height of the handlebar: Release the quick assembly lever and
loosen the securing screw. Push the locking part and, holding it, move the
EN
‑ 4 ‑