Brandson Equipment 302697 Mode D'emploi page 19

Resistance
Setting range
200Ω
2000Ω
20kΩ
200kΩ
2000kΩ
Maximum open circuit voltage: 3V; Overload protection: 15 seconds max
220Vrms
Temperature ( with K-type temperature sensor)
Setting range
20°C to 150°C
150°C to 300°C
6 Initial use and operation
Take the device out of the package and remove all packaging material. A battery
compartment, which is secured by a screw, is located at the back of the device.
Remove the screw, open the battery compartment and insert two 1.5V AAA
batteries. Make sure the polarity of the contacts is correct. Then close the battery
compartment.
Note: Please use only 1.5V AAA batteries and not rechargeable batteries, since a
low voltage of 1.2V may result in device malfunction!
English
Resolution
0.1 Ω
1 Ω
10 Ω
100 Ω
1 kΩ
Resolution
1°C
Accuracy
± 1.0 %
± 1.0 %
Accuracy
± 1.0 %
± 1.5 %
19