Location Of Controls - iCES ISCD-33 Mode D'emploi

Location of controls
1) Leather handle
2) Memory button
3) Repeat/Ran button
4) Tuner/CD button
5) Volume up/down knob
6) On/standby button
7) Mute button
8) CD/USB exchange button
9) Folder up/down button
10) Skip up down
/
11) Tuning knob
12) Play/pause button
13) Stop button
14) LCD display
15) USB socket
16) 3.5mm headphone jack
17) CD door open/close
18) Dial pointer
19) FM-stereo LED indicator
20) Tuner LED indicator
21) Rod antenna
22) Ac socket
23) Battery compartment
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation

Unpack all parts and remove protective material.

Do not connect the unit to the mains before checking the main voltage and before all other connections have
been made.

Do not cover any vents and make sure that there is a space of several centimeters at the back of the unit for
ventilation.
AC connection
1. Connect the one end of the detachable power cord to the ac socket (22) and the other end to the ac outlet.
2. When you first plug the unit into the mains, the unit will go into standby mode.
3. Turn on the unit by On/Standby button (6), the TUNER LED indicator (20) will light up.
DC
connection
For DC operation, please insert 6 pcs size C (UM-2) battery at batter compartment (23) as below direction:-
button
3